经典牛牛

Welcome to the official website of Wuxi Jeneng Boiler Co., Ltd.!
Boiler, thermal oil furnace, industrial boiler, Wuxi Jeneng Boiler Add to Favorites | Set Homepage
  • Large heating area and emission standard of condensing waste heat pressure hot water boiler
    The condensing waste heat and pressure hot water boiler mainly adopts its two-return full-wet back structure during the production process, and is equipped with high-efficiency energy-saving devices and high-efficiency condensers. During the production, the furnace structure is optimized, so ...
    2018
    3-22
  • Main features and advantages of coal-fired hot water boilers
    In the process of making coal-fired hot water boiler, it is mainly composed of front arch, rear arch, chain grate, body, light furnace wall, steel frame and thermal insulation layer. The body of coal-fired hot water boiler is mainly composed of smoke box. , Water wall tubes, pan shells, and ...
    2018
    3-21
  • Explosion-proof device of hot water boiler and safe precipitation time
    The hot water boiler has a large shell diameter and a large water capacity during operation. It has a strong ability to adapt to load changes during operation. The output of the entire equipment is stable and the volume of hot water space is large. The water temperature is balanced. The rear plate of the hot water boiler Will be set up ...
    2018
    3-21
  • Boiler flue gas flow area and system control requirements
    In the process of making the boiler, the horizontal three-return wet back structure is mainly used to improve the operating environment of the boiler, so that the boiler efficiency and service life can be effective to a certain extent. The flue gas channel of the boiler is placed in the water, and its tail ...
    2018
    3-21
  • Heat recovery and process temperature of gas-conducting oil furnace
    The gas heat-conducting oil furnace can obtain low-pressure and high-temperature heat medium to a certain extent. The entire equipment is very convenient and uniform in heating during the adjustment process. In this way, the precise process temperature can be effectively met.
    2018
    3-20
  • Multi-level sealing method and multiple interlocking protection of oil-fired steam boiler
    In the process of making oil-fired gas steam boilers, it is mainly adopted its most mature three-return full wet back structure in the world, which is safe and reliable. The unique large-combustion design of oil-fired steam boilers can be used in a certain process ...
    2018
    3-20
  • Heat exchange mode and main features of ultra-low nitrogen condensing waste heat steam boiler
    The condensing waste heat steam boiler is mainly used in the runway type rebirth chamber. The center of the two-return convection tube bundle of the equipment is symmetrically and uniformly arranged on both sides of the furnace gall. ...
    2018
    3-20
  • Design specifications and emission standards for ultra-low nitrogen waste heat pressure hot water boilers
    The ultra-low nitrogen waste heat pressure hot water boiler mainly adopts a two-pass full-wet back structure during the production process, and is equipped with a high-efficiency energy-saving device and a high-efficiency condenser to a certain extent. By optimizing the furnace structure to a certain extent, ...
    2018
    3-19
  • Thermal oil furnace operation regulations and DC structure
    The heat-conducting oil furnace is a DC-type special boiler developed based on the design concept of forced circulation during operation. Its equipment mainly uses its closed-loop heating for heating, so that it can communicate directly with the atmosphere and can effectively extend ...
    2018
    3-19
  • Steam power cycle and heating requirements of steam boilers
    In the process of purchasing and using a steam boiler, you must first understand the working principle of the boiler. It is mainly because during the use of the steam boiler, you must know its reason to be able to use it better. ...
    2018
    3-19
  • The temperature of exhaust gas from gas-fired steam boilers decreases and the boiling point of water
    The gas steam boiler is mainly operated by its gas combustion heating equipment during the operation process. The entire equipment is mainly equipped with its burner under the way, its two return structure, the gas steam boiler burns during the operation ...
    2018
    3-17
  • Exhaust of gas from air valve of heat transfer oil furnace and increase of pressure difference
    During the operation of the heat-conducting oil furnace, when the current of the circulating pump of the equipment is lower than the normal value, the effectiveness of the circulating pump decreases and the flow rate decreases. This can cause the heating pipeline to be fouled and should be cleaned. ...
    2018
    3-17
1 2 3 4 5 6 7 8 9 10 ... 124 125 » « 1 2 3 4 5 6 7 8 9 10 ... 124 125 »
about us
company profiles
Production Environment
Honor
Marketing services
Career Opportunities
Products and Technology
Organic heat carrier boiler
Steam boiler
thermal Engineering
burner
Domestic advanced combustion system
Domestic more advanced and economical process
Biomass fuel and boiler
contact us
Wuxi Jeneng Boiler Co., Ltd. Address: Liuye Road, Hujing Industrial Park, Binhu District, Wuxi City No. 27 Jingsheng Road, Qianqiao Industrial Park, Huishan District, Wuxi Contact: Mr. Zhang Sales Hotline: 0510-85583388 85580755
Fax: 0510-85582333
Website: http://www.jnjrl.com
E-Mail: 13771507807@163.com
Welcome to scan the QR code and contact us
Copyright © 2018 Wuxi Jeneng Boiler Co., Ltd. specializing in the production of boilers, thermal oil furnaces, industrial boilers.