经典牛牛

Welcome to the official website of Wuxi Jeneng Boiler Co., Ltd.!
Boiler, thermal oil furnace, industrial boiler, Wuxi Jeneng Boiler Add to Favorites | Set Homepage
  • Introduction of heat carrier boiler control types and system design principles
    The heat carrier boiler has the characteristics of high temperature and low pressure and high temperature control accuracy, and is widely used in industrial fields. In the industrial production process, as a heating device, it can provide a relatively stable high-temperature heat source. Control of heat carrier boilers in ...
    2012
    6-21
  • Which industries can be used for thermal oil furnace
    More and more people are familiar with heat-conducting oil furnaces. However, although its promotion is expanding, many customers still have questions. Which industries can heat-conducting oil furnaces be suitable for? Due to the use of heat transfer oil for heating and steam ...
    2012
    6-20
  • How to use thermal oil furnace
    1. The level of heat transfer oil in the high-level tank should be properly observed and the sensitivity of the liquid level alarm should be monitored. Observe the various instruments at any time and pay attention to the operation of each part to prevent danger. ...
    2012
    6-19
  • What problems will occur during the use of the burner?
    1. The opening of the air baffle of the burner is greater than 50%. The flame is “blown out” due to the high amount of air passing through the burner, so that the burner cannot be ignited or maintained in a burning state. At this time, the burner should be closed properly. Damper until the burner is lit ...
    2012
    6-18
  • Introduction of emergency plan for hot water boiler
    1. The stove watchman must press the "emergency stop button" to stop the boiler if the following conditions are found during the watch: (1) The boiler water vaporizes due to poor circulation, and the boiler outlet hot water temperature rises to a temperature not corresponding to the outlet pressure. Little difference ...
    2012
    6-16
  • Burner common faults and treatment methods
    1. The long light cannot be ignited When the igniter is inserted into the burner and the long light fuel valve is opened and the long light cannot be ignited, check: (1) When the igniter is inserted into the burner, the igniter goes out. (2) The problem is mainly that the system is high ...
    2012
    6-15
  • Combustion principle and process of coal water slurry boiler
    1. Principle of air pressure atomized suspension combustion The coal water slurry and air enter the furnace through the burner as a jet, which promotes the strong mixing of the coal slurry air and the hot flue gas and the rapid evaporation of water; meanwhile, the coal water slurry flow is affected by the four walls of the furnace high…
    2012
    6-14
  • Introduction to the routine maintenance of the burner
    Maintenance items for PVYD series burners include cleaning or replacing burner burners, beacon burner and cone assemblies, and valve assemblies. 1. Maintenance of burner burner (1) Close the fuel supply valve of burner burner and long light. (...
    2012
    6-13
  • Burner operating procedures
    1. Preparation (1) Confirm that the heating furnace is in a safe and protected state. (2) Confirm that all fuel supply valves, including control valves and manual shut-off valves, are closed. (3) Fully open the burner air control adjustment device. (4) Will heat ...
    2012
    6-12
  • Introduction of commissioning content of heating oil furnace
    Commissioning is a very important step, which can ensure that the organic thermal energy body carries the heat transfer oil to work normally. It directly inspects the quality of the installation and the key to the function of the system. In addition, through commissioning, it can familiarize the operator with maintenance ...
    2012
    6-11
  • Introduction of operation and maintenance procedures for organic heat carrier boilers
    First, the operating rules of organic heat carrier boiler 1. Check whether the safety valve, pressure gauge and water level gauge are sensitive. 2. Check whether there is oil in the upper tank and whether the water level of the evaporator is normal. 3. Turn on the circulating oil pump and check the oil pressure difference. 4. Prepare fuel ...
    2012
    6-9
  • Introduction to the research directions of thermal energy engineering
    "Thermal energy engineering" is the science of researching the rational, efficient and clean use and conversion of energy (focusing on thermal energy), researching and developing new energy-saving technologies, new energy-saving processes (processes), new equipment and new materials, etc. Energy-saving products…
    2012
    6-8
about us
company profiles
Production Environment
Honor
Marketing services
Career Opportunities
Products and Technology
Organic heat carrier boiler
Steam boiler
thermal Engineering
burner
Domestic advanced combustion system
Domestic more advanced and economical process
Biomass fuel and boiler
contact us
Wuxi Jeneng Boiler Co., Ltd. Address: Liuye Road, Hujing Industrial Park, Binhu District, Wuxi City No. 27 Jingsheng Road, Qianqiao Industrial Park, Huishan District, Wuxi Contact: Mr. Zhang Sales Hotline: 0510-85583388 85580755
Fax: 0510-85582333
Website: http://www.jnjrl.com
E-Mail: 13771507807@163.com
Welcome to scan the QR code and contact us
Copyright © 2018 Wuxi Jeneng Boiler Co., Ltd. specializing in the production of boilers, thermal oil furnaces, industrial boilers.